Color-Coded XLR Cable Pack with ID Rings

What it is

A pack of balanced 3-pin XLR female to male microphone cables in which every cable carries a different color ID ring at both ends. When eight microphones run into one stage box, the drummer's kick mic and the lead vocal are easy to tell apart without tracing the cable by hand. Choose packs of four, six or eight cables, in three lengths, with black jackets and colored rings or with colored jackets.

Each cable is the same build as our single XLR microphone cable, so a buyer can add single replacements later and they still match.

Who it's for

• Podcast and streaming brands selling multi-mic bundles for two- to four-person shows.
• Retailers who want a ready-to-sell gift set rather than loose cables.
• Rental companies, churches and live venues that need channel identification across many inputs.

Build & specs (standard build)

• Cable: 2 × 24 AWG oxygen-free copper (OFC) twisted pair, PE insulation with cotton filler, braided OFC shield, soft PVC jacket about 6.0 mm outer diameter
• Plugs: 3-pin XLR female (with latch) to 3-pin XLR male, zinc-alloy housings with nickel finish, gold-plated brass contacts, soldered
• Pinout: Pin 1 shield, Pin 2 hot (+), Pin 3 cold (−); passes +48 V phantom power
• ID rings: same color on both ends of each cable; 4-pack red, yellow, green, blue; 6-pack red, orange, yellow, green, blue, purple; 8-pack adds white and gray
• Lengths: 1 m (3.3 ft), 3 m (9.8 ft), 6 m (19.7 ft), measured tip to tip
• Packaging: hook-and-loop tie on each cable; whole set in a color box as standard, or a storage pouch

Customization options

• Your logo on the plug housings or on the set box
• Custom ring colors and jacket colors; packs of 2, 3, 10 or 12 cables
• Lengths from 0.5 m to 20 m, including mixed lengths in one pack
• Set box, pouch, insert card and barcode labels
• Contacts are gold-plated as standard; nickel-plated contacts are available as a customization.

Ordering notes

• Low MOQ. You can combine several pack sizes and lengths in one order to reach the minimum, with a smaller minimum per design.
• A sample set is available before you order.
• Lead time depends on the customization and is confirmed in your quote.
• Specified by Haisen (Hong Kong). Manufactured in Guangdong, China by our manufacturing partners.